wood crack filler

aeson tite WOOD FILLO is two component modified,thixotropic epoxy adhesive system.When both components are mixed in recommended ratios and cured appropriately at room temperature,an excellent bond strength can be achieved with most of the substrates including glass,metal,reactive plastics,wood, textile and natural stones.Faster productivity can be achieved,if curing is performed at higher temperature between 40.C and 60.C.Curing at higher temperature is recommended to achieve optimum bond strength. aeson tite WOOD FILLO is available in 1.8 kg bottles,9 kg HDPE Jerry cans.other packing may be considered on request. Application: The mixed mass is applied by brush or spatula on the surface to be adhered.The mix must be used within its pot life Application: The mixed mass is applied by brush or spatula on the surface to be adhered.The mix must be used within its pot life.Joint flooring system for flooring | Potting system for small electronics | Wood industries Good electrical insulating properties | High bond strength | mechanical strength even in dynamic conditions thermally stable and suitable to perform in extreme conditions | Water and chemical resistant Joint flooring system for flooring | Potting system for small electronics | Wood industries .AESSON Fillo is available in 1.8 kg bottels,9 kg HDPE jerry cans.other packing may be considered on request. Curing : Curing normally takes place at room temperature within about 24 hours depending on the ambient temperature but may be accelerated by the application of heat.