Jewelry Coating EPOXY

Aesson Bond Jewelry Epoxy resin (SMR-R-02 resin /SMH- H-07 Hardener) is two component modified epoxy based system suitable for clear coating . .the system after curing gives an excellent gloss by polishing surface .The system is room temperature curing ,low viscous and has good properties for coating . Contents: resin 1 kg +hardener 500 gram./2.1 mixing ratio, .resin formulated specifically for Jewell and metal coating . High gloss, non-yellowing, bubble proof, crystal clear, self-leveling.. Application & Storage ; Stir will before use.Thoroughly mix the resin and hardener in ratio 2.1 mix small Quantities at a time and consume within 30-40 minute . Safety Directions ; Keep out of reach children . avoid contact eye and skin.in case of skin contact,rinse or soap with warm soapy water .                                                                                     Application & Storage ; Stir will before use.Thoroughly mix the resin and hardener in ratio 2.1 mix small Quantities at a time and consume within 30-40 minute .                                                                                                                                      Simple mixing ratio 2.1 & port life 30 to 40 minutes ,high Gloss and low shrinkage                                                                 Non yellowing crystal clear high gloss epoxy resin                                                                                                                     Water and chemical resistant clear resin and transparent                                                                                                          High gloss, non-yellowing, bubble proof, crystal clear, self-leveling