EGYPOXY Coating RESIN

Aesson Bond EGYPOXY Coating Resin & Hardener is two component modified epoxy based system suitable for clear coating . .the system after curing gives an excellent gloss by polishing surface .The system is room temperature curing ,low viscous and has good properties for coating . Contents: resin 1 kg +hardener 500 gram./2.1 mixing ratio, .resin formulated specifically for Jewell and metal coating . High gloss, non-yellowing, bubble proof, crystal clear, self-leveling.. Application & Storage ; Stir will before use. Thoroughly mix the resin and hardener in ratio 2.1 mix small Quantities at a time and consume within 35-45minute . Safety Directions ; Keep out of reach children . avoid contact eye and skin.in case of skin contact, rinse or soap with warm soapy water .

Application & Storage ; Stir will before use. Thoroughly mix the resin and hardener in ratio 2.1 mix small Quantities at a time and consume within 35-45 minute .                                                                                                                                     Simple mixing ratio 2.1 & port life 30 to 40 minutes ,high Gloss and low shrinkage                                                                    Non yellowing crystal clear high gloss epoxy resin                                                                                                                     Water and chemical resistant clear resin and transparent                                                                                                         High gloss, non-yellowing, bubble proof, crystal clear, self-leveling                                                                                          We Are the Original Manufacturer Epoxy resin & Hardener Aesson Bond is a registered trademark of S.M.& Sons. Storage and handling AESSON Egypoxy resin should be stored in a cool and dry place, preferably in a sealed container and should not be exposed to direct sunlight.This product has a self life of one year.